Stecamat 862
Processor-controlled charger for lead batteries
Description
The Stecamat 862 battery charger charges your battery gently and quickly thanks to the processor-controlled charging process. This also allows for pre-damaged or deeply discharged batteries to be treated, making a long service life possible with the Stecamat 862. The dust and splash-proof housing with IP 65 protection allows it to be mounted in outdoor areas. The integrated RS485 interface allows data to be read out and processed centrally. Various charging parameters can also be adjusted via this communication interface and the charging current can be increased up to 35 A. The integrated interface allows communication with buses that have an integrated bus identification module (BIM).
Features
Product features
- IP 65 jet waterproof casing
- Half the charging time compared to simple, non-controlled chargers with the same rated current
- Optimal for charging batteries with liquid electrolyte and gel / absorbed electrolyte (AGM)
- Suitable for totally discharged batteries
- Constant battery operational readiness through integrated trickle charge
- Charging below the gassing voltage
- Optimal charging of damaged batteries
- Communication with bus identification module for vehicle identification, heating control and query of ignition status
- Interface for bidirectional communication
Electronic protection functions
- Protection in the case of wrong or damaged batteries
- Battery overcharge protection
- Charger output protected against short circuits, reverse polarity and overvoltage
Displays
- Multi-coloured LED shows operating states
Operation
- Charging parameters adjustable via RS485
Interfaces
- RS-485 for connection to the depot management software
Downloads
Technical data
| 862 | |
|---|---|
| Charging rated voltage | 24 V |
| Charge current | 20 A (max. 35 A) |
| End-of-charge voltage | 27.6 V |
| Trickle charge voltage | 27.2 V |
| Characteristic curve | UoIUoIU |
| Grid voltage | 230 V AC ±10 % |
| Frequency range | 50 Hz (45 Hz … 65 Hz) |
| Mains electricity (230 V) | 4.0 A |
| Discharge current during grid failure | 1.0 mA |
| Protection class | I |
| Casing | aluminium / plastic |
| Degree of protection | IP 65 |
| Ambient temperature | -40 °C … +60 °C |
| Cooling principle | convection |
| Dimensions (X x Y x Z) | 226 x 535 x 127 mm |
| Weight | 11.5 kg |